General Information
8 LCD (liquid crystal display)
Displays messages on the screen to help you
set up and use your machine.
Also, you can adjust the angle of the LCD
display by lifting it.
9 Ink
Lets you clean the print head, check the print
quality, and check the available ink volume.
10 Fax Preview (MFC-665CW only)
Lets you preview incoming faxes on the LCD.
11 Message Center keys (MFC-665CW only):
[] _ MC On/Off
Turns the Message Center on or off. Will
also flash if you have new messages,
[] Play/Record
Plays voice messages stored in the
memory. Will also let you record telephone
calls.
[] Erase
Deletes voice messages.
12 Speaker Phone (MFC-665CW only)
Turns the speaker phone on or off.
LCD display screen
The LCD shows the current machine status
when the machine is idle.
I I III
23 456
Current Receive Mode
Lets you see the current receive mode.
I Fax (Fax only)
J F/T (Fax/Tel)
J TAD (External TAD) (MFC-440CN only)
I HC (Msg Ctr) (MFC-665CW only)
J Mnl (Manual)
Fax in the machine's memory
Shows how many received faxes are in the
memory.
Voice message in the machine's memory.
(MFC-665CW only)
Shows how many received voice messages
are in the memory.
Memory Status
Lets you see the available memory in the
machine.
Wireless Status (MFC-665CW only)
A four level indicator shows the current
wireless signal strength if you are using a
wireless connection.
0 Max
Ink indicator
Lets you see the available ink volume.
9
To Next Page
Loading...
Need help?
General
