Loading documents and paper
Slowly push the paper tray completely
into the machine.
@ While holding the paper tray in place,
pull out the paper support (1) until it
clicks and unfold the paper support
flap (2).
Note ................................................................................
Do not use the paper support flap for
Legal paper.
Loading envelopes, post
cards and photo paper
Loading envelopes
m Use envelopes that weigh from 20 to 25 Ib
(75 to 95 g/m2).
m Some envelopes need margin settings to
be set in the application. Make sure you
do a test print first.
Do not use any of the following types of
envelopes, as they will cause paper feed
problems:
• If they are of a baggy construction.
• That are embossed (have raised writing
on them).
• That have clasps or staples.
• That are pre-printed on the inside.
Glue Double flap
Occasionally you may experience paper
feed problems caused by the thickness,
size and flap shape of the envelopes you
are using.
19 ii_i:;_i!_!_i!i_i_!i!_!_i!i_i_!i!_!_i!i_i_!i!_!_i!i_i_!i!_!_i!i_i_!i!_!_i!i_i_!
To Next Page
Loading...
Need help?
General
