Chapter 2
@
Gently put the paper into the paper tray
print side down and top edge first.
Check that the paper is flat in the tray.
Gently adjust the paper side guides with
both hands and the paper length guide
to the paper.
Make sure the paper side guides touch
the sides of the paper.
Note ..................................................................................
When you use Legal size paper, press
and hold the universal guide release
button as you slide out the front of the
paper tray.
Note .......................................................................................
Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause feed problems.
Close the output paper tray cover.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii! !18
To Next Page
Loading...
Need help?
General
