Brother MFC-665CW - 4 Security Features; TX Lock (MFC-440 CN Only); Setting and Changing the TX Lock Password

Security features
TX Lock
(MFC-440CN only)
TX Lock lets you prevent unauthorized
access to the machine.
While TX Lock is On, the following operations
are available:
m Receiving faxes
m Fax Forwarding (If Fax Forwarding was
already On)
m Remote retrieval (If Fax Storage was
already On)
m PC Fax Receive (if PC Fax Receive was
already On)
While TX Lock is On, the following operations
are NOT available:
m Sending faxes
m Copying
m PC printing
m Scanning
m PhotoCapture
Setting and changing the TX
Lock password
Setting up the password
Note ......................................................................................
• If you forget the TX Lock password,
please call Brother Customer Service.
• If you have already set the password, you
will not need to set it again.
Press Menu,
Press • or • to choose Fa×.
Press • or • to choose
Hiscellaneous.
Press OK.
O Press • or • to choose TX Lock.
Press OK.
Enter a 4-digit number for the password.
Press OK.
When the LCD shows verify:, re-
enter the password.
Press OK.
Press Stop/Exit.
Changing the TX Lock password
Press Menu,
Press • or • to choose Fax,
Press • or • to choose
Hiscellaneous.
Press OK.
O Press • or • to choose TX Lock.
Press OK.
Press • or • to choose
Set Password.
Press OK.
Enter a 4-digit number for the current
password.
Press OK.
Enter a 4-digit number for a new
password.
Press OK.
When the LCD shows Veriiy :, re-
enter the password.
Press OK.
Press Stop/Exit.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!_!z2