Chapter 5
Contrast
If your document is very light or very dark, you
may want to change the contrast.
Use Light when sending a light document.
Use Dark when sending a dark document.
@ Press (Fax).
Press • or • to choose Contrast.
Press OK.
Press • or • to choose Auto, Light
or Dark.
Press OK.
Note ......................................................................................
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting in any of the following conditions:
• When you send a color fax.
• When you choose Photo as the Fax
Resolution.
Changing fax resolution
The quality of a fax can be improved by
changing the fax resolution.
@
@
@
Press (Fax).
Press • or • to choose
Fax Resolution,
Press OK.
Press • or • to choose the resolution
you want.
Press OK.
Note ...............................................................................
You can choose four different resolution
settings for black & white faxes and two for
color.
Standard Suitable for most typed
documents.
Fine
S.Fine
Photo
Good for small print and
transmits a little slower than
Standard resolution.
Good for small print or artwork
and transmits slower than Fine
resolution.
Use when the document has
varying shades of gray or is a
photograph. This has the
slowest transmission.
! !!i!!i!!
Standard Suitable for most typed
documents.
Fine Use when the document is a
photograph. The transmission
time is slower than Standard
resolution.
If you choose s.Fine or Photo and then
use the Color Start key to send a fax, the
machine will send the fax using the Fine
setting.
42
To Next Page
Loading...
Need help?
General
