Brother MFC-665CW - Setting and Changing the Memory Security Password; Turning the Memory Security On;Off

Chapter 4
Setting and changing the
memory security password
Setting a password for the first time
Note
• If you forget the Memory Security
password, please call Brother Customer
Service.
• If you have already set the password, you
will not need to set it again.
Press Menu.
Press • or • to choose Fax.
Press OK.
Press • or • to choose
Miscellaneous.
Press OK.
O Press • or • to choose
Hem Security.
Press OK.
Enter a 4-digit number for the password.
Press OK.
When the LCD shows Verify:, re-
enter the password.
Press OK.
Press Stop/Exit.
Changing your memory security
password
Press Menu.
Press • or • to choose Fax.
Press OK.
Press • or • to choose
Hiscel laneous.
Press OK.
O Press • or • to choose
Hem Security.
Press OK.
Press • or • to choose
Set Password.
Press OK.
@ Enter the registered 4-digit number for
the current password.
Press OK.
Enter a 4-digit number for a new
password.
Press OK.
@ When the LCD shows Verify :, re-
enter the new password.
Press OK.
Press Stop/Exit.
Turning the memory security
on/off
Turning on the memory security lock
Press Menu.
Press • or • to choose Fax.
Press OK.
Press • or • to choose
Miscellaneous.
Press OK.
O Press • or • to choose
Hem Security.
Press OK.
Press • or • to choose
Set Security.
Press OK.
@
Enter the registered 4-digit password.
Press OK.
The machine goes offline and the LCD
shows Secure Mode.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii! !34