Brother MFC-665CW - 15 Pictbridge; Before Using Pictbridge; Using Pictbridge; Setting Your Digital Camera

PictBridge
Your Brother machine supports the
PictBridge standard, allowing you to connect
to and print photos directly from any
PictBridge compatible digital camera.
Before Using
PictBridge
PictBridge requirements
To avoid errors, remember the following
points:
m The machine and the digital camera must
be connected using a suitable USB cable.
m The image file extension must be .JPG
(Other image file extensions like .JPEG,
.TIF, .GIF and so on will not be
recognized).
m PhotoCapture Center operations are not
available when using the PictBridge
feature.
Using PictBridge
Setting your digital camera
Make sure your camera is in PictBridge mode. The
following PictBridge settings may be available
from the LCD of your PictBridge compatible
camera.
Depending on your camera some of these settings
may not be available.
Camera Menu Options
Selections
Paper Size Letter, A4, 4"x6", Printer
Settings (Default setting) 2
Paper Type Plain Paper, Glossy
Paper, Inkjet Paper,
Printer Settings (Default
setting) 2
Layout Borderless: On,
Borderless: Off, Printer
Settings (Default setting) 2
DPOF setting 1
Print Quality Normal, Fine, Printer
Settings (Default setting) 2
Color On, Off, Printer Settings
Enhancement (Default setting) 2
1
2
See DPOFprinting on page 114 for more details.
If your camera is set to use the Printer Settings
(Default setting), the machine will print your photo
using the settings below
Settings Options
Paper Size 4"×6"
Paper Type Glossy Paper
Layout Borderless: On
Print Quality Fine
Color Off
Enhancement
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!i!112