Chapter 2
How to load envelopes and post cards
Before loading, press the corners and
sides of the envelopes or post cards to
make them as flat as possible.
Note
If the envelopes or post cards are 'double-
feeding,' put one envelope in the paper
tray at a time.
If you have problems when printing on
envelopes, try the following suggestions:
Open the envelope flap.
Make sure the open flap is either to the
side of the envelope or to the back edge
of the envelope when printing.
Adjust the size and margin in your
application.
\
@
Put the envelopes or post cards into the
paper tray with the address side down
and the leading edge in first as shown in
the illustration. Slide the paper side
guides (1) and paper length guide (2) to
fit the size of the envelopes or post
cards.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii! !20
To Next Page
Loading...
Need help?
General
