Brother MFC-665CW - Page 24

Chapter 1
Note .......................................................................................................................................................................................................................
Most of the illustrations in this User's Guide show the MFC-440CN.
Dial Pad
Use these keys to dial telephone and fax
numbers and as a keyboard for entering
information into the machine.
(Canada only) The # key lets you temporarily
switch the dialing mode during a telephone call
from Pulse to Tone.
2 Fax and telephone keys
m Search/Speed Dial (MFC-440CN)
Lets you look up and dial numbers that are
stored in the memory.
m Redial/Pause
Redials the last 30 numbers called. It also
inserts a pause when programming quick
dial numbers.
[] Hook (MFC-440CN only)
Press before dialing if you want to make
sure a fax machine will answer, and then
press Black Start or Color Start.
Also, press this key after picking up the
handset of an external telephone during the
F/T double/pseudo-ring.
[] Hold (MFC-665CW only)
Lets you place telephone calls on hold.
3 Mode keys:
[] Fax
Lets you access Fax mode.
[] Scan
Lets you access Scan mode.
[] Copy
Lets you access Copy mode.
[] PhotoCapture
Lets you access PhotoCapture Center ®
mode.
4 Menu keys:
m Volume keys
In Fax mode, you can press these keys to
adjust the ring volume.
I • Search/Speed Dial (MFC-665CW)
Lets you look up and dial numbers that are
stored in the memory.
m 4orl_
Press to scroll backward or forward to a
menu selection.
m •orT
Press to scroll through the menus and
options.
I Menu
Access the main menu.
m OK
Selects a setting.
I Clear/Back
Press to cancel the current setting.
5 Start keys:
1 Color Start
Lets you start sending faxes or making
copies in full color. Also lets you start a
scanning operation (in color or black &
white, depending on the scanning setting in
the ControlCenter software).
J _ Black Start
Lets you start sending faxes or making
copies in black & white. Also lets you start
a scanning operation (in color or black,
depending on the scanning setting in the
ControlCenter software).
6 On/Off
You can turn the machine on or off.
Stop/Exit
Stops an operation or exits from a menu.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii! !8