Printing (Continued)
Machine cannot print full pages of a Reducetheprintresolution.(SeePrintingforWindows®orPrintingandFaxingfor
document.
Macintosh ® in the Software User's Guide on the CD-ROM.)
Out of memory message occurs.
Reduce the complexity of your document and try again. Reduce the graphic
quality or the number of font sizes within your application software.
Printing Received Faxes
,. Ngg s,, . ....
Condensed print and white streaks You probably had a bad connection, with static or interference on the telephone
across the page or the top and line. Ask the other party to send the fax again.
bottom of sentences are cut off.
Vertical black lines when receiving. The sender's scanner may be dirty. Ask the sender to make a copy to see if the
problem is with the sending machine. Try receiving from another fax machine.
Received color fax prints only in Replace the color ink cartridges that are empty or nearly empty, and then ask the
black and white, other person to send the color fax again. (See Replacing the ink cartridges on
page !43.) Check that Advanced Fax Operation is set to off. (See Turning off
Advanced Fax Operations on page 81 .)
Left and Right margins are cut off or Turn on Auto Reduction. (See Printing a reduced incoming fax on page 50.)
a single page is printed on two
pages.
Phone Line or Connections
Dialing does not work. (No dial Check that the machine is plugged in and that the On/Off key is on.
tone) Check all line cord connections.
(Canada only) Change Tone/Pulse setting. (See Quick Setup Guide.)
Send a manual fax by lifting the handset of the external phone and dialing the
number. Wait to hear fax receiving tone before pressing Black Start or
Color Start.
The machine does net answer Make sure the machine is in the correct receiving mode for your setup. (See
when called. Choosing the Receive Mode on page 46.) Check for a dial tone. If possible, call
your machine to hear it answer. If there is still no answer, check the telephone line
cord connection. If there is no ringing when you call your machine, ask your
telephone company to check the line.
Receiving Faxes
Cannot receive a fax. Check all line cord connections.
Make sure the machine is in the correct receiving mode for your setup. (See
Receive mode settings on page 49.)
If you often have interference on the phone line, try changing the menu setting of
Compatibility to Basic. (See Phone line interference on page 143.)
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!i!132
To Next Page
Loading...
