TroubleshootingandRoutineMaintenance
Network Difficulties (Continued)
The network scanning feature does (For Windows @users only) Firewall setting on your PC may be rejecting the
not work. necessary network connection. Follow the instructions below to configure the
The network PC-Fax Receive Firewall. If you are using a personal Firewatl software, see the User's Guide for
feature does not work. your software or contact the software manufacturer.
<Windows ¢ XP SP2 users>
1 Click the Start button, Settings, Control Panel and then Windows Firewall.
Make sure that Windows Firewall on the Basic tab is set to On.
2 Click the Exceptions tab and Add port button.
3 Enter any name, port number (54295 for network scanning and 54926 for
Network PC-Fax receiving), choose UDP and click OK.
4 Make sure if the new setting is added and is checked, and then click OK.
For Windows @XP SP! user's, please visit the Brother Solutions Center.
Your computer cannot find your <Windows @users>
machine.
Firewatl setting on you PC may be rejecting the necessary network connection.
For detail, see the instruction above.
<Macintosh ¢ users>
Re-select your machine in the DeviceSelector application located in Macintosh
HD/Library/Printers/Brother/Utilities or from the model of ControlCenter2.
135
To Next Page
Loading...
