App. 1-30
Confidential
• Selectors 6 and 7:No. of CNG cycles to be detected (when the line is connected via
the external telephone in the external TAD mode, via the built-in
telephone in the TAD mode, or via the machine in the automatic
reception of the F/T mode)
The machine interprets a CNG as an effective signal if it detects the CNG by the number of
cycles specified by these selectors when the line is connected via the external telephone in
the external TAD mode, via the built-in telephone in the TAD mode, or via the machine in
the automatic reception of the F/T mode.
<WSW27> (Function setting 5)
• Selector 2: Ringer OFF setting
This selector determines whether or not the ringer can be set to OFF.
• Selectors 4: Detection of distinctive ring
If this selector is set to "1," the machine detects only the number of rings; if it is set to "0,"
the machine detects the number of rings and the ringing time length to compare the
detected ringing pattern with the registered distinctive one.
Selector No. Function Setting and Specifications
1 Not used.
2 Ringer OFF setting 0: Yes 1: No
3
Automatic playback of OGM
when switched to the TAD mode
(Not used.)
4
Detection of distinctive ringing
pattern
0: Yes 1: No
5 Not used.
6 Recording quality (Not used.)
7
Recording time for high
recording quality (Not used.)
8 Not used.
Note:
• Selectors 4 and 5 are applicable to the U.S.A. models only.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
