Brother MFC-9440CN - Using the Machine Safely; Electrical Safety Warnings; Handling Hot Components; Fuser Unit Warning

Confidential
2-17
(21) Remove the six cup S M4x8 Taptite screws from the top side of the Joint cover ASSY.
(22) Release the Pin to remove the Joint cover ASSY from the Frame unit.
Fig. 2-24
(23) Remove the four cup S M3x8 Taptite screws, and then remove the two Hook slopes.
Fig. 2-25
Hook slope
Hook slope
Taptite, cup S M3x8
Frame unit
Taptite, cup S M3x8
<Front>
Taptite, cup S M4x8
Taptite, cup S M4x8
Joint cover ASSY
Pin
Pin
Frame unit
<Front>