Brother MFC-9440CN - FCC Declaration of Conformity; Device Compliance Statement; Interference Correction Measures; Interface Cable Requirements

Confidential
2-22
(6) Secure the three cup S M3x6 Taptite screws onto the back side of the Joint cover ASSY.
Fig. 2-34
(7) Secure the three cup S M3x6 Taptite screws onto the front side of the Joint cover ASSY.
(8) Secure the two cup S M3x8 Taptite screws onto the left side of the Joint cover ASSY.
Fig. 2-35
Joint cover ASSY
<Back side>
Taptite, cup S M3x6
Joint cover ASSY
Taptite, cup S M3x6
Taptite, cup S M3x8
<Front>
<Left side>