Brother MFC-9440CN - Page 113

Confidential
2-21
(4) Assemble the two Hook slopes with the four cup S M3x8 Taptite screws.
Fig. 2-32
(5) Catch the Pin. Then, put the Joint cover ASSY onto the Frame unit and secure the six cup
S M4x8 Taptite screws onto the top of the cover.
Fig. 2-33
Hook slope
Hook slope
Taptite, cup S M3x8
Frame unit
Taptite, cup S M3x8
<Front>
Taptite, cup S M4x8
Taptite, cup S M4x8
Joint cover ASSY
Pin
Pin
Frame unit
<Front>