Brother MFC-9440CN - Product Safety Guidelines; Grounded Plug and Outlet Usage; Power Cord and Cable Safety; Electrical Shock and Fire Risk Prevention

Confidential
2-25
(13) Assemble the FG harness FB with the one cup S M3x6 Taptite screw.
(14) Assemble the FG harness ADF with the one cup S M3x6 Taptite screw.
Note:
Make sure to place the Harness of the connector CN1 and CN2 on the back of the Driver
PCB shield.
Fig. 2-40
(15) Connect the three Connectors (CN1, CN2, CN5) into the Driver PCB ASSY.
Fig. 2-41
Driver PCB ASSY
<Left side>
CN5
CN2
CN1
Driver PCB ASSY
FG harness ADF
Taptite, cup S M3x6
Taptite, cup S M3x6
FG harness FB
<Left side>
Document scanner unit
Driver PCB shield
Document scanner unit
CN1
CN2