96
4
4
Remote Setup 4
The Remote Setup program lets you configure many machine settings from a Windows
®
application. When
you start this application, the settings on your machine will be downloaded automatically to your computer
and displayed on your screen. If you change the settings, you can upload them directly to the machine.
Click the button, All Programs, Brother, MFC-XXXX, and Remote Setup.
OK
Lets you start uploading data to the machine and exit the Remote Setup program. If an error message is
displayed, enter the correct data again and then click OK.
Cancel
Lets you exit the Remote Setup program without uploading data to the machine.
Apply
Lets you upload data to the machine without exiting the Remote Setup program.
Print
Lets you print the chosen items on the machine. You cannot print the data until it is uploaded to the
machine. Click Apply to upload the new data to the machine and then click Print.
Export
Lets you save the current configuration settings to a file.
Remote Setup (For MFC models) 4
To Next Page
Loading...
Need help?
General
