ControlCenter4
83
3
a Select the Scan tab.
b Click (E-mail). The Scan Settings dialog box appears.
c You can configure the scan settings in this dialog box. If you want to preview and configure the scanned
image, check PreScan box.
d Click Scan. Your default E-mail application will open and the image will be attached to a new E-mail.
The E-mail feature does not support Webmail services.
Saving the scanned image 3
The (File) button lets you scan an image to a folder on your hard disk in one of the file types shown in
the file attachment list.
a Select the Scan tab.
b Click (File). The Scan Settings dialog box appears.
c You can configure the scan settings in this dialog box. If you want to preview and configure the scanned
image, check PreScan box.
d Click Scan. The image will be saved in the folder you have chosen.
How to change the default settings of each button 3
You can change the default settings of the (Image), (OCR), (E-mail) and (File) buttons.
a Right-click the button that you want to configure and click Button settings. The settings dialog box will
appear.
b Choose the settings for File Type, PreScan, Resolution, Scan Type, Document Size, Brightness,
Contrast, Continuous Scanning, 2-sided Scanning
1
and Auto Crop as needed.
1
(For MFC-J4710DW)
c Click OK. The new settings will be used as the default settings.
• To preview and configure the scanned image, check PreScan box in the settings dialog box.
• You cannot use Auto Crop for Scan to OCR.
To Next Page
Loading...
Need help?
General
