Brother MFC-J4310DW User Manual

ControlCenter2
162
10
SCAN 10
There are four scan buttons for the Scan to Image, Scan to OCR, Scan to E-mail and Scan to File
features.
 Image (Default: Apple Preview)
Lets you scan a page directly into any graphic viewer/editor application. You can choose the destination
application, such as Adobe
®
Photoshop
®
or any kind of image editing application on your computer.
 OCR (Default: Apple TextEdit)
Lets you scan a page or document, automatically run the OCR application and put text (not a graphic
image) into a word processing application. You can choose the target word processing application, such
as Microsoft
®
Word or any word processing application on your computer. You must download Presto!
PageManager and install it on your computer. For installation information see Using Presto! PageManager
on page 157.
 E-mail (Default: your default E-mail software)
Lets you scan a page or document directly into an E-mail application as a standard attachment. You can
choose the file type and resolution for the attachment.
 File
Lets you scan directly to a disk file. You can change the file type and destination folder, as needed.
ControlCenter2 gives you the ability to configure the hardware Scan button on your machine and the
ControlCenter2 software button for each scan feature. To configure the hardware Scan button on your
machine choose the Device Button tab in the configuration menu for each of the SCAN buttons. To configure
the software button in ControlCenter2 choose the Software Button tab in the configuration menu for each of
the SCAN buttons.
NOTE
You can change the Scan button settings using your Brother machine - however, these changes are only
temporary.
If you want to make permanent changes, choose the Device Button tab in the configuration menu for
each of the SCAN buttons and configure as required.

Brother MFC-J4310DW Specifications

General

Brand	Brother
Model	MFC-J4310DW
Category	All in One Printer
Language	English