EasyManuals Logo

Brother MFC-J6730DW Service Manual

Brother MFC-J6730DW
402 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #347 background imageLoading...
Page #347 background image
5-43
Confidential
1.3.25 Traveling Speed Check of Head/Carriage Unit (Maintenance mode 69)
< Function >
This procedure checks whether the traveling speed of the head/carriage unit is within
the specified range.
< Operating Procedure >
(1) Press the 6 and 9 keys in this order in the initial stage of the maintenance mode.
The machine shows "CR AGING" on the LCD and starts checking the traveling
speed of the head/carriage unit.
In each of travel speeds of 43.3, 26.7 and 21.7 inches/second (ips), the machine
checks whether the maximum and minimum traveling speeds of the head/carriage
unit are within the specified range.
- If the maximum and minimum speeds in all of the three traveling speeds are
within the specified range, the "430 270 210" appears on the LCD.
- If any one is out of the range, the machine shows some message, e.g., "430 270
21X" on the LCD. This sample message indicates that the speed variation is
within the allowable range when the head/carriage unit travels at 43.3 and 26.7
inches/second; however, it is out of the range at 21.7 inches/second.
(2) Press the X key to return the machine to the initial stage of the maintenance mode.
1.3.26 Customizing Destinations (Maintenance mode 74)
< Function >
This procedure customizes the machine according to settings of the language,
functions, and worker switches.
< Operating Procedure >
(1) Press the 7 and 4 keys in this order in the initial stage of the maintenance mode.
The "Select 74?" appears on the LCD.
(2) Press the Mono Start key to display the current settings on the LCD.
(3) Enter the desired customizing code.
(4) Press the Mono Start key to save the new setting and return the machine to the
initial stage of the maintenance mode.
If the destination is changed, the "PARAMETER INIT" appears on the LCD. Then,
if "PLS UPDATE PROG" and "Please DL ROM" is also displayed on the LCD, load
the latest firmware. (refer to Chapter 4, Section 1.3 "Install the firmware
(Maintenance mode 28).").
(5) Pressing the X key during the above procedure returns the machine to the initial
stage of the maintenance mode without saving the customizing code.
Note: If no keys are pressed for at least one minute with any display state, the machine
automatically returns to the initial stage of the maintenance mode.

Table of Contents

Other manuals for Brother MFC-J6730DW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-J6730DW and is the answer not in the manual?

Brother MFC-J6730DW Specifications

General IconGeneral
Duplex printingYes
Print technologyInkjet
Maximum resolution4800 x 1200 DPI
Duplex printing modeAuto
Print speed (black, normal quality, A4/US Letter)22 ppm
Print speed (color, normal quality, A4/US Letter)20 ppm
Copier resize25 - 400 %
Maximum number of copies99 copies
Scanner typeADF scanner
Maximum scan area295 x 429.8 mm
Maximum scan resolution19200 x 19200 DPI
Optical scanning resolution- DPI
Optical scanning resolution (black)600 x 600 ppi
Optical scanning resolution (color)600 x 300 ppi
FaxingColor faxing
Fax memory200 pages
Modem speed33.6 Kbit/s
Fax forwarding toPC
Fax speed dialing (max numbers)100
Digital sender-
Printing colorsBlack, Cyan, Magenta, Yellow
Maximum duty cycle- pages per month
DisplayLCD
Control typeTouch
Product colorBlack
Market positioningHome & office
Paper input typePaper tray
Total input capacity250 sheets
Total output capacity100 sheets
Maximum input capacity501 sheets
Auto document feeder (ADF) input capacity50 sheets
Envelopes sizesC5, Com-10, DL, Monarch
Paper tray media typesGlossy paper, Plain paper, Recycled paper
Non-ISO print media sizesFolio (media size), Ledger (media size), Legal (media size), Letter (media size)
ISO A-series sizes (A0...A9)A3, A4, A5, A6
ISO B-series sizes (B0...B9)B4, B5, B6
Photo paper sizes (imperial)9x13, 10x15, 13x18 \
Maximum ISO A-series paper sizeA4
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology10/100Base-T(X)
Security algorithms64-bit WEP, 128-bit WEP, WPA-AES, WPA-PSK, WPA-TKIP, WPA2-AES, WPA2-PSK, WPA2-TKIP
Ethernet LAN data rates10, 100 Mbit/s
Internal memory128 MB
Standard interfacesEthernet, USB 2.0
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (off)0.04 W
Power consumption (ready)6 W
Power consumption (sleep)1.6 W
Power consumption (copying)28 W
Power consumption (average operating)- W
Mac operating systems supportedMac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.9 Mavericks
Server operating systems supportedWindows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016
Windows operating systems supportedWindows 10, Windows 7, Windows 8, Windows 8.1, Windows Vista
Weight and Dimensions IconWeight and Dimensions
Depth477 mm
Width575 mm
Height374 mm

Related product manuals