318
GEARCASE – STANDARD ROTATION
GEARCASE ASSEMBLY
Apply Ultra Lock to threads and inst all two retain-
ing screws. Tighten screws to a torque of 18 to 20
ft. lbs. (24 to 27 N·m).
Final Assembly and Adjustment
To complete gearcase assembly, refer to:
• GEARCASE LEAK TEST on p. 288
• WATER PUMP SERVICE on p. 292
• SHIFT ROD ADJUSTMENT on p. 295
• GEARCASE RE MOVAL AND INSTALLATION
on p. 289
• Gearcase Lubricant on p. 37
• Propeller Hardware Installation on p. 287
• Trim Tab Adjustment on p. 30.
During bre ak-in period o f a re assembled g ear-
case, change the gearcase lubricant between 10
to 20 hours of operation.
1. Retainer screws 006835
To Next Page
Loading...
