41
.ROUTINE SERVICE
FUEL AND OIL SYSTEMS
2
FUEL AND OIL SYSTEMS
Routine replacement of fi lters reduces the possi-
bility of f oreign mate rial restricting the incoming
fuel or oil supplies.
Replacement filter elements are available through
Evinrude/Johnson Genuine Parts.
Fuel Filter
Evinrude E-TEC V-model outboards are equipped
with a water-sensing, water-se parating fuel filter .
Refer to FUEL COMPONENT SER VICING on
p. 143.
Oil Filters and Oil Reservoir
Perform visual inspections to identify oiling system
leaks. Make certain the oil t ank is filled a nd oil
supply is not contaminated.
Serviceable oil filters are locate d in th e oil inje c-
tion tank, and in the oil supply line before the oil lift
pump(s).
Air Silencer
The air silencer on Evinrude outboards maximizes
air flow while minimizing noise.
Routine cleaning of the air silence r is recom-
mended to remove any accumulation of debris.
Hoses and Connections
Check cond ition of all hoses and con nections in
both the fuel and oil systems:
• Visually inspect all components.
• Observe all clamp s, hoses, a nd co nnections
while outboard is running.
• Replace all damaged components.
• Repair all leaks.
1. Water-separating fuel filter 005022
1. Filter, oil supply line
2. Filter, oil injection tank
004250
42785
004218
A WARNING
Failure to check for fue l lea kage could
allow a leak to go undetec ted, resulting in
fire or explosion.
To Next Page
Loading...
