45
.ROUTINE SERVICE
STORAGE
2
Digital Gauge Method
The ICON Pro 5 inch and I-Command 3.5 inch
digital gauges provide a winterize feature for 2008
and newer V4 and V6 models.
Use the “Mo de” butto n ( ICON Pro 5 inch), or
“Menu” bu tton ( I-Command 3.5 inch ) to access
the winterize feature.
• Refer to the digital gauge user’s guide for com-
plete instructions.
Additional Recommendations
• Top off oil reservoir.
• inspect the fuel filter. If there is debris in the fuel
filter, it must be replaced.
• Replace gearcase lubricant.
• Remove and inspect propeller.
• Clean and grease propeller shaft.
• Blow water from ge arcase speedometer pickup
system (gearcase speedometer models only).
• Lubricate all grease fittings and linkages.
• Inspect ou tboard, st eering system, and co n-
trols. Repla ce all damaged and wo rn compo-
nents. Refer to man ufacturer’s and lubricatio n
recommendations.
• Touch up p ainted surfaces as nee ded. Coat
outer painted surfaces with automotive wax.
• Remove ba ttery(s) from boat. S tore in a cool,
dry location. Periodically charge battery(s) while
stored. Ref er to manuf acturer’s mainte nance
recommendations when servicing batteries.
• Store outboard in upright (vertical) position.
• Check for fuel leakage.
ICON Pro 5 inch Digital Gauge
1. Mode button
008686
I-Command 3.5 inch Digital Gauge
1. Menu button
008191
A WARNING
Failure to check for fue l lea kage could
allow a leak to go undetec ted, resulting in
fire or explosion.
To Next Page
Loading...
