8-4
GEARCASE
REMOVAL AND DISASSEMBLY
13. Pull out the shift rod assembly.
14. Remove the driveshaft support housing.
NOTE:
Pry the housing with a screwdriver as shown in the figure.
15. Pull out the driveshaft with the driveshaft support housing
and remove the washer.
16. Take out the following parts.
• Pinion gear
• Pinion gear backup shim
• Pinion gear thrust washer
17. Take out the following parts.
• Forward gear thrust washer
• Forward gear
• Forward gear backup shim
To Next Page
Loading...
