BRP Johnson 4HP User Manual

9-2
WIRE / HOSE ROUTING
WIRE AND HOSE ROUTING
WIRE AND HOSE ROUTING
• Do not over-bend (kink) or twist hoses when installing.
• When installing hose clips, position tube to avoid contact with other parts.
• Check that hoses do not contact rods and levers during either engine operation or standstill.
• Extreme care should be taken not to cut, abrade or cause any other damage on hoses.
• Care should be taken not to cause hoses to be compressed excessively by any clamp when fit-
ted.

BRP Johnson 4HP Specifications

General

Brand	BRP
Model	Johnson 4HP
Category	Outboard Motor
Language	English