Bruker BPHG 90 - Signage; Spare Parts

Safety
26 Z33081_00_001
3.8 Signage
Thefollowingsymbolsandinformationsignscanbefoundintheworkarea.Theyreferto
theirimmediatesurroundings.
The identification and placement of warning labels are included in the manual. The
laboratorysupervisorisresponsibleforensuringthatallthewarninglabelsaremaintained
intheirproperplaceanytimethatthedeviceisused.
ElectricalVoltage
Onlyqualifiedelectriciansarepermittedtoworkinawork
roommarkedbythissign.Unauthorizedpersonsmustnot
entertheworkplacesthusmarkedandmustnotopenthe
markedcabinet.
DangerSpot
Warningindicatingadangerspotinworkrooms.
ThewarninglabelmaybeorderedusingBrukerPart
Number67470.
3.9 SpareParts
LossofGuarantee
Theuseofnonapprovedsparepartswillinvalidatethemanufacturer‘sguarantee.
Purchase spare parts from authorised dealers or directly from the manufacturer. See
Contactformanufacturer'saddress.