BTL 5000 Sono - Course of Therapy; Starting, Interrupting, and Ending Therapy

BTL-5000 SERIES
USER'S MANUAL
page 18 of 56
START / STOP
2.6 COURSE OF THERAPY
2.6.1 Start, Interruption and End of Therapy
To start therapy on the selected channel, press the time / stop (17) knob. The therapy can start only if the therapy
parameters screen is displayed.
Interrupted therapy can be resumed by pressing the time / stop (17) knob or stopped by pressing the esc (16) button.
During therapy interruption, you can adjust the time (except for laser therapies and all types of sequences) by the
time / stop (17) button.
During electrotherapy, you can adjust the intensity during therapy by turning the intensity (18) knob to the right (to
increase intensity) or to the left (to decrease intensity). For faster intensity setting, keep the intensity (18) knob
pressed down while turning it left or right.
intensity
Direction of
increase of intensity
Laser therapy can also be started / interrupted by the start / stop button on the laser probe.
time / sto
p
time / sto
p
time / sto
p
esc
time/stop
intensity
Stopping therapy after pause
Running therapy
screen
Therapy
parameters screen
Interrupted
therapy screen
Setting of intensity
(only electrotherapy)
Interruption of therapy
(pause)
Starting therapy
Resuming of
interrupted therapy
Time adjustment
during pause