BTL-5000 SERIES
USER'S MANUAL
page 32 of 56
3.2.14.2 File System Formatting
Clears all data and programs created by the user. You may select this function if the “repair of files” function did not
help.
3.2.14.3 Delete Installed Accessories
Deletes all installed accessories. Use only in case of improper installation – corrupted accessory image on the
channel tab, connected accessories are not detected (the “?” symbol is displayed), etc.
3.2.14.4 Default Setting without Losing User Data
All factory settings are restored. User data, such as patients, therapies, etc. are preserved.
3.2.14.5 Restart of All Generators
This function switches all generators in the device off and on, to get them into the initial status such as at starting of
the device. Therapy possibly running on a generator (tab) is stopped. This function should be used only in cases when
e.g. by electromagnetic interference a generator switches off and its activity cannot be restored without switching the
whole device on and off. This function enables to initialize generators wihout the need of restarting the whole unit.
3.2.14.6 Information of Free Space for User Data
The bottom part of the screen displays the current free space in the memory that can be used for user data. User data
are for example patients, saved user diagnoses, I/t curves, etc.
The user can use the memory marked "E:"; the memory marked "S:" is intended for internal use.
3.2.15 Special Settings
Vary for each generator. See your User’s Guide for details.
To Next Page
Loading...
