BTL-5000 SERIES
USER'S MANUAL
page 5 of 56
1 GENERAL CHARACTERISTICS
The BTL-5000 series offers advanced and well designed physiotherapy units for professional use. Depending on the
required configuration, each system can consist of up to three units -- for electrotherapy, ultrasound or laser therapy
treatment.
The touch-controlled display considerably simplifies the use of the unit. The displays are supplied as black and white
or colour. The touch screen is equipped with a touch stylus for a more convenient operation. A vertically positioned
case of the instrument enables you to see the information on the screen clearly and from different positions. In
addition, the display's brightness can be adjusted to fit the light conditions in the office. The information displayed on
the screen will guide you throughout the whole therapy. Simply adjust the parameters by pressing the touch screen
buttons and turn the main knob to set the intensity.
The modular design of the BTL equipment allows you to build the combination you require. Combine an
electrotherapy unit of your choice with either ultrasound or laser or both into a single unit. This can save considerable
money on your physiotherapy investment. Alternatively, you may wish to upgrade your unit later, as your needs grow.
Selecting a diagnosis from a list of alphabetically organized treatment protocols, or selecting a program, will make an
easy and efficient start of the therapy. Naturally, you can adjust any treatment parameter manually by the simple use
of the touch screen buttons. Throughout the whole therapy, the display informs you about the remaining therapy time,
channel and therapeutical method used, type of therapy applied, attached accessories, and other necessary data.
If several accessories are attached to your unit at the same time, you can easily recognize the accessory required for
a specific treatment. Select a treatment on the display (electrotherapy, ultrasound or laser), and the control light on the
corresponding accessory (electrotherapy cable, ultrasound probe, or laser probe/cluster) will switch on to indicate that
this accessory should be used.
Save your time by using the pre-programming of the BTL-5000 units. Based on detailed research and practical use of
the units, the well-organized pre-programmed protocols will give you recommendations for treating various conditions.
The unit also includes up to 500 free lots to define your own protocols. Moreover, you can recall the last 20
treatments.
Add the names of your patients and other relevant information into the unit's internal memory and connect the patient
data with pre-programmed or your own protocols. When your patients call again simply recall their name and apply
the pre-set therapy.
With every BTL unit, you can purchase a cart specially designed for BTL products. Its versatile design allows you to
conveniently store and use 1 or 2 physiotherapy units and a vacuum unit. The cart includes a range of accessory trays
and baskets. Four well-built and steady castors ensure easy movement of the unit in the office or in hospital
Please visit our corporate website at http://www.btlnet.com
for the latest information on BTL products and services.
To Next Page
Loading...
