BTL 5000 Sono - Technical Parameters; Basic Parameters of Electrotherapy Generator

BTL-5000 SERIES
USER'S MANUAL
page 44 of 56
7 TECHNICAL PARAMETERS
Identification of the unit
BTL-5000 Series – physiotherapy unit
For unit configuration
see Chapter 8 Units Configurations
Operating conditions
Ambient temperature + 10 °C to + 40 °C
Relative humidity 30 % to 75 %
Atmospheric pressure 700 hPa to 1060 hPa
Position vertical – on legs
Type of operation continuous
Transport and storage conditions
Ambient temperature - 10 °C - + 55 °C
Relative humidity 25 % - 85 %
Atmospheric pressure 650 hPa - 1100 hPa
Position any
Max. storage time max. 1 year
Additional conditions transport only in the supplied packing
Power supply
Input max. 80 VA
Voltage ~ 99 V - 126 V (115 V nominal), alternately
~ 198 V to 252 V (230 V nominal), alternately
Frequency 50 Hz - 60 Hz
Equipment protection class II (according to IEC 536)
External exchangeable fuse T1.6A / 250V, tube fuse 5 x 20 mm, according to IEC 127-2
Mains switch according to IEC 601-1 on the rear side of the equipment, positions 0 and I
Power switch
on the front panel, labelled on off
Internal chemical sources
Type of batteries lithium CR2032 (replacement by BTL Service Department)
Design
Weight – device only max. 5 kg
Weight – including packing and
accessories
max. 8 kg
Dimensions (l x h x w) 230 x 390 x 260 mm
3
, ( 9.1“ x 15.4“ x 10.2“ )
Dimensions – when packed (l x h x w) 480 x 500 x 400 mm
3
, (18.9“ x 19.7“ x 15.8“)
Covering grade according to EN 60 529 IP 20
Display unit
Display LCD b/w 320x240 (¼ VGA), diag. 14.5 cm (5.7“)
LCD colour 640x480 (VGA), diag. 19 cm (7.5“)
Classification
Applied part type BF
Class according to MDD 93/42/EEC IIb
Time of therapy
For electro and laser therapies 0 to 100 minutes
For ultrasound therapies 0 to 30 minutes
Step of setting 1 second
Accuracy of therapy time
± 2 % from the pre-set value
Accuracy of timer
5 second per day
7.1 BASIC PARAMETERS OF ELECTROTHERAPY GENERATOR
Adjustable values
Output current* max. 140 mA (maximum instantaneous value)
Output current - HVT* max. 4 A (maximum instantaneous value)
Output current - microcurrents max. 999 µA (maximum instantaneous value)
Output voltage max. 130 V (maximum instantaneous value)