Buhler SnackFix - Page 75

Maintenance
Maintenance Plan
SnackFix 2016-08 75
Maintenance interval
Maintenance work
Personnel
Yearly
Safety related components (valves, sensors):
Perform a functional check
Technical employee
Yearly
Inspection by Bepex-Technical employee
Change wear parts (seals etc.)
Bepex-Technical
employee
  Lubrication list on
page 86.
Technical employee
When required
Change scrapers on the downholder
Technical employee
Change knives
Fill up release agent
When required
Inspection: Transport belts
 Check roller scrapers and belt scrapers and re-
adjust if required.
 Check belt tension and belt run and adjust if re-
quired.
 Check belt rollers and clean them if required.
 Check belt surface for immoderate wear.
 Exchange belt if worn out.
Technical employee
For further information regarding maintenance, see
separate operating instructions in the documentation file.