PMW20
119
PMW20
118
5. Erase the previous program and click "Actions"→"Erase Decice", as shown in Fig.1.11.
Fig.1.11
The confirm command interface pops up and then click "OK", as shown in the Fig.1.12.
Fig.1.12
The device is erased, as shown in the Fig.1.13.
Fig.1.13
6. Write Program: Click the option "Write", as shown in the Fig.1.14.
Fig.1.14
Start reading and then verify it, as shown in the Fig.1.15.
SM-PMW202020001-EN
SM-PMW202020001-EN
To Next Page
Loading...
