D
D-6 Flex Max901e 1GHz Trunk and Bridger Amplifiers 1502154 Rev D
Accessory Tables
Equalizers provide sloped attenuation of RF signal with the greatest attenuation occurring at the
lowest rated frequency. Cable simulators provide sloped attenuation of RF signal with the greatest
attenuation occurring at the highest rated frequency. PADs provide flat loss attenuation of RF signal
across the entire passband.
■ SEQ-1G series cable equalizers and SCS-1G cable simulators are designed for forward
balancing 1002MHz systems.
■ SEQ-862 series cable equalizers and SCS-862 cable simulators are designed for 870MHz
systems. SEQ-862 equalizers, however, with and without covers, can still be used with
Flex Max901e 1GHz amplifiers.
■ SEQ-750 series cable equalizers and SCS-750 cable simulators are designed for 750MHz
systems. SEQ-750 equalizers, however, with and without covers, can be used with
Flex Max901e 1GHz amplifiers.
■ MEQ/MEQT-42, MEQ/MEQT-55, and MEQ/MEQT-65 cable equalizers are designed for
return balancing and should be selected according to the return path bandwidth.
■ NPB series cable attenuators may be used for both forward and return balancing in any
system.
To Next Page
Loading...