CAB Hermes Series User Manual

43cab - Produkttechnik GmbH
Fig. 8 e Mounting the printer at the bracket
Hermes has one each bolt (4) at the front and the rear side. Using these bolts
the printer is hung in into the grooves of the bracket (1). After that the printer is
fixed at the bracket with six screws (5).
4
1
5

CAB Hermes Series Specifications

General

Display	LCD with backlight
Cutter	Optional
Dispenser	Optional
Print Technology	Thermal Transfer
Resolution	203 dpi, 300 dpi, 600 dpi (depending on the model)
Interfaces	USB, Ethernet, Serial
Memory	64 MB RAM, 128 MB Flash
Media Types	Labels, continuous media
Supported Barcode Types	Data Matrix, QR Code
Max Print Width	4.09 inches (104 mm)