Cambium Networks ePMP 1000 User Manual

CAMBIUM NETWORKS
026v003
143
Attribute
Meaning
Traps
Disabled: SNMP traps for system events are not sent from the device.
Enabled: SNMP traps for system events are sent to the servers
configured in table Trap Servers.
Trap Community
String
Configure a SNMP Trap Community String which is processed by the
servers configured in Trap Servers. This string is used by the trap server
to decide whether or not to process the traps incoming from the device
(i.e. for traps to successfully be received by the trap server, the
community string must match).
Trap Servers
The Trap Servers table is used to configure trap destinations for SNMP
traps generated by the device.
Server IP
Configure the IP address of each SNMP trap server target.
Server Port
Configure the port to which SNMP traps are sent from the ePMP device.
System Logging (Syslog)
Server 1-4
Specify up to four syslog servers to which the device sends syslog
messages.
SysLog Mask
Configure the levels of syslog messages which the devices send to the
servers configured in parameters Server IP 1-4.
Caution
Choose only the syslog levels appropriate for your deployment.
Excessive logging can cause the device log file to fill and begin
overwriting previous entries.
cnMaestro
Remote Management
When Enabled, the device will be managed by cnMaestro - the Cambium
Remote Management System, which allows all Cambium devices to be
managed in the cloud.
cnMaestro URL
Configure the URL of cnMaestro. The default value is
https://cloud.cambiumnetworks.com.
Cambium-ID
Configure the Cambium ID that the device will use for on-boarding on to
cnMaestro.
Onboarding key
Configure the password/key associated with the Cambium-ID that the
device will use for on-boarding on to cnMaestro.
Account Management

Cambium Networks ePMP 1000 Specifications

General

Brand	Cambium Networks
Model	ePMP 1000
Category	Wireless Access Point
Language	English