Cambium Networks ePMP 3000 Series User Manual

CHAPTER 4: USING THE DEVICE
MANAGEMENT INTERFACE
USING THE MENU OPTIONS
PAGE 4-62
Attribute
Meaning
Soft Device
Reboots
Indicates the number of times the device has been rebooted by user
through GUI, CLI or SNMP since the statistics were last reset from the GUI, CLI,
or SNMP.
Hard Device
Reboots
Indicates the number of times the device has been rebooted via power feeding
and due to power outage since the statistics were last reset from the GUI, CLI,
or SNMP.
Network Entry
Attempts (Access
Point Mode)
Total number of Network Entry Attempts by Subscriber Module devices.
Successful
Network Entries
(Access Point
Mode)
Total number of successful network entry attempts.
Network Entry
Authentication
Failures (Access
Point Mode)
Total number of failed Network Entry Attempts by Subscriber Module devices.
Radar (DFS)
Detections
Subscriber Module Statistics (Access Point Mode)
MAC Address
MAC Address of the Subscriber Module connected to the Access Point.
Total Uplink
(Kbits)
Total amount of traffic received via the Access Point wireless interface from the
Subscriber Module in Kbits.
Total Uplink
Packets
Total number of packets received via the Access Point wireless interface from this
Subscriber Module.
Uplink Packet
Drops
Total number of packets dropped prior to sending out of the Access Point
Ethernet interface due to RF errors (packet integrity error and other RF related
packet error) from the Subscriber Module.
Total Downlink
(Kbits)
Total amount of traffic transmitted out of the Access Point wireless interface in
Kbits.
Total Downlink
Packets
Total number of packets transmitted out of the Access Point wireless interface.
Downlink Packet
Drops
Total number of packets dropped after transmitting out of the Access Point
wireless interface due to RF errors (No acknowledgement and other RF related
packet error).

Cambium Networks ePMP 3000 Series Specifications

General

Brand	Cambium Networks
Model	ePMP 3000 Series
Category	Wireless Access Point
Language	English