Cambium Networks ePMP 3000 Series User Manual

CHAPTER 4: USING THE DEVICE
MANAGEMENT INTERFACE
USING THE MENU OPTIONS
PAGE 4-65
Attribute
Meaning
Wireless MAC
Address
The hardware address of the device wireless interface.
Ethernet MAC
Address
The hardware address of the device LAN (Ethernet) interface.
SFP Port MAC
Address
The hardware address of the device SFP interface.
Sync Source
Status
The status of the configured GPS synchronization source.
Read-Only Users
Displays the number of active Read-Only users logged into the radio.
Read-Write Users
Displays the number of active Read-Write users logged into the radio.
GUI User
Authentication
The method by which users are authenticated when logging into the device
management interface.
Factory Reset Via
Power Sequence
Enabled: When Enabled under Tools > Backup/Restore > Reset Via Power
Sequence, it is possible t
the power cycle sequence explained under Resetting ePMP to factory defaults by
power cycling on page 5-9.
Disabled
configuration using the power cycle sequence.
cnMaestro
Connection Status
The current management status of the device with respect to the Cambium Cloud
Server. When Enabled under Configuration->System, the device will be managed
by the Cambium Remote Management System, which allows all Cambium devices
to be managed from the Cambium Cloud Server.
cnMaestro
Account ID
The ID that the device is currently using to be managed by the Cambium Cloud
Server.

Cambium Networks ePMP 3000 Series Specifications

General

Brand	Cambium Networks
Model	ePMP 3000 Series
Category	Wireless Access Point
Language	English