Cambium Networks ePMP 3000 Series User Manual

CHAPTER 4: USING THE DEVICE
MANAGEMENT INTERFACE
USING THE MENU OPTIONS
PAGE 4-85
4 Perform link alignment using eAlign
5 Once alignment is complete, set Configuration>Radio>Power Control>Max Tx
Power back to Auto
6 Click the Save button
Tools > Wireless Link Test page
Use the Wireless Link Test page to conduct a simple test of wireless throughput. This allows user to
determine the throughput that can be expected on a particular link without having to use external tools.
Figure 35 Tools > Wireless Link Test page
Table 55 Tools > Wireless Link Test page attributes
Attribute
Meaning
Test Setup
Mode
Single Radio: The link test is conducted between the Access Point and one
Subscriber Module

Cambium Networks ePMP 3000 Series Specifications

General

Brand	Cambium Networks
Model	ePMP 3000 Series
Category	Wireless Access Point
Language	English