CHAPTER 4: USING THE DEVICE
MANAGEMENT INTERFACE
PAGE 4-32
Configure a SNMP Trap Community String which is processed by the servers
configured in Trap Servers. This string is used by the trap server to decide
whether or not to process the traps incoming from the device (i.e. for traps to
successfully be received by the trap server, the community string must match).
Specify up to four syslog servers to which the device sends syslog messages.
Configure the levels of syslog messages which the devices send to the servers
configured in parameters Server 1-4.
Caution
Choose only the syslog levels appropriate for your installation. Excessive
logging can cause the device log file to fill and begin overwriting previous
entries.
When Enabled, the device will be managed by cnMaestro - the Cambium
Remote Management System, which allows all Cambium devices to be
managed in the cloud.
Configure the URL of cnMaestro. The default value is
https://cloud.cambiumnetworks.com.
Configure the Cambium ID that the device will use for on-boarding on to
cnMaestro.
Configure the password/key associated with the Cambium-ID that the device
will use for on-boarding on to cnMaestro.
The Administrator account has full read and write permissions for the device.
Disabled: The disabled user is not granted access to the device management
interface. The administrator user level cannot be disabled.
Enabled: The user is granted access to the device management interface.
The username associated with the administrator account, used upon device
login.
account can override this password. The password character display may be
toggled using the visibility icon .
To Next Page
Loading...
Need help?
General
