2.0 06/2012 © CAME Cancelli Automatici S.p.A. - The data and information in this manual may be changed at any time and without obligation on the part of Came Cancelli Automatici S.p.A. to notify said changes.
ENGLISH
Index
General safety instructions 3
Legend 4
Description 4
Packing list 4
Intended use 4
Operational limits 4
Technical data 4
Dimensions 5
Main component parts 5
System feasibility 6
Preliminary checks 6
Tools and equipment 6
Types and thickness of cables 6
Standard installation 7
Application examples 7
Installation 8
Laying the corrugated tubing and fastening the brackets 8
Installing the gearmotor and transmission arms 10
Mounting the mechanical endstops (if no mechanical strike plates are included) 11
Adjusting the limit switches 13
Manual release override and blocking of the gearmotor 15
Command and control electronics 16
Description 16
Main component parts 16
LED signal light 17
Electrical connections 18
Power supplies 18
Warning devices 18
Command devices 19
Gearmotor with encoder 20
Photocells 22
Sensitive safety edges 22
Electrical connection for operating the photocell's safety test 23
Settings and adjustments 23
Programming 24
Memorising data 24
Description of programming commands 24
Menu map 25
Motor test and calibrarion menu 26
Features menu 27
Users menu 32
Info menu 32
Adding user with associated command 33
Cancelling one user 33
Motor test 34
Calibrating travel 35
Error messages 36
Safety instructions 36
Maintenance 37
Periodic maintenance 37
Extraordinary maintenance 37
Dismantling and disposal 38
CE Dec
laration 39
To Next Page
Loading...
Need help?
General
