CAME FA40230

F
i
A2
0
i
ENTER
>
>
ENTER
>...>
F
i
A4
0
ENTER
>
>
ENTER
>...>
i
F
i
A3
0
i
ENTER
>
>
ENTER
>...>
p.
25
25 - Manual code:
119 D W 02
119DW 0 2 ver.
2.0
2.0 06/2012
© CAME Cancelli Automatici S.p.A. - The data and information in this manual may be changed at any time and without obligation on the part of Came Cancelli Automatici S.p.A. to notify said changes.
ENGLISH
A 2 (Motor test): test activation to check for proper rotation direction of the gearmotor (see the paragraph about motor test).
0 = deactivated; 1 = activated.
Confirm with the ENTER button after choosing the value for each feature.
Motor test and calibrarion menu
Important! We suggest starting the programming by first doing the following:
1 Motor test;
2 Calibration of travel.
A 4 (Reset parameters): data restoring procedure (for default settings) and travel calibration cancellation.
0 = deact
ivated; 1 = activated.
A 3 (travel calibration): automatic gate-travel calibration operation (see the paragraph about calibrating travel).
0 = deact
ivated; 1 = activated.
Warning! If needed, you can restore the factory settings with the following feature: