2.0 06/2012 © CAME Cancelli Automatici S.p.A. - The data and information in this manual may be changed at any time and without obligation on the part of Came Cancelli Automatici S.p.A. to notify said changes.
ENGLISH
Select A 3.
Press ENTER to confirm.
1) Select 1 and press ENTER to confirm the
automatic-calibration-of-travel mode...
The leaf of the first motor will perform a closing
manoeuvre until it reaches the strike plate.
...consequently, the leaf of the second motor will
perform the same manoeuvre...
...then the second motor's leaf, will open comple-
tely until the end-strike...
... the leaf of the first motor will perform the same
manoeuvre.
N.B.: before calibrating the travel, check that the manoeuvring area is free of any obstacles and check for the presence of any mechanical
opening and closing strik
e-plates.
Important! While calibrating, all safety devices will be deactivated until calibration is complete, except for the TOTAL STOP.
Calibrating travel
To Next Page
Loading...
