2.0 06/2012 © CAME Cancelli Automatici S.p.A. - The data and information in this manual may be changed at any time and without obligation on the part of Came Cancelli Automatici S.p.A. to notify said changes.
ENGLISH
Legend
Technical data
Description
Intended use
Operational limits
Packing list
The complete range:
001
FA40230 - Self-locking gearmotor with articulated transmission arm for leaves up to 2.3 m;
001FA40230CB - Self-locking gate-operator with built-in control panel complete with articulated transmission arm for gate leaves of up to 2.3 m.
Optional accessories:
001FA001 - LED card;
001LOCK81 - Single cylinder release electro-lock;
001LOCK82 - Double cylinder release electro-lock;
001STYLO-BD - Straight transmission arm with slide guide;
001H3000 - Safety casing complete with release toggle and command button for the L = 5 m. pull-cord release.
Important! Make sure that the command and safety equipment and accessories are CAME originals; this will ensure easy installation and maintenance
of your system.
This operator is engineered and built by Came Cancelli Automatici S.p.A. in compliance with current safety regulations, to automate residential and apar-
ment building siwng-gates.
Any installation or use other than that indicated in this manual is forbidden.
Model FA40230 - FA40230CB
Maximum leaf length 2.3 m 2 m 1.5 m 1 m
Maximum leaf weight 200 kg 215 kg 250 kg 300 kg
This symbol means parts must be read carefully.
This symbol means the parts describe safety issues.
This symbol tells you what to notify to the user.
Gearmotor
ate bracket
T
ransmission
arms
Mechanical
end stops
FA40230CB FA40230
Power supply 230 V AC 50/60 Hz
Mot
or power supply 230 V AC 50/60 Hz 230 V AC 50/60 Hz
Maximum draw. A 1.4 A 1.4
Power rating 160 W 160 W
Maximum Torque. 180 Nm 180 Nm
Opening time at 90° 18 S 18 S
Duty cycle 30% 30%
Protection rating IP54 IP54
Motor heat protection 150°C 150°C
Weight 12,700 kg 10,860 kg
Insulation class I I
x2 UNI 5931 M8x80 bolt
x2 UNI 7474 M8 nut
x1 Ø10 plug
x1 Slow shaft washer
x1 UNI 5739 M10x14 bolt
x2 Arm pin
x2 UNI 6593 Ø6 washer
x2 UNI 5739 M6x10 bolt
x1 UNI 6592 Ø12 washer
x2 UNI 5933 M8x20 bolt