Chapter 1
1-9
1.2.3.2 Timer Settings
0015-4316
iR5065 / iR 5055 / iR5075 / / /
*Factory default.
T-1-6
1.2.3.3 Adjustment/Cleaning
0015-4317
iR5065 / iR 5055 / iR5075 / / /
*Factory default.
**Indicated when the appropriate accessory is installed.
T-1-7
1.2.3.4 Report Output
0015-4318
iR5065 / iR 5055 / iR5075 / / /
*Factory default.
**Indicated when the appropriate accessory is installed.
T-1-8
register image for image merge register: original size/full merge, see-through merge (20, *50, 99%) form name (24 characters max.) form read
delete
check coy: cassette select, print sort
detail info: display detail info, change form name
register character string for print/stamp register/edit: change character string (16 character max.)
delete
register manual feed paper standard mode ON (select paper size/select paper type)/*OFF
select standard mode for local print select paper type: *auto paper select/paper source select
number of prints: *1 to 9999
sorter: sort/group/staple sort/*shift sort/shift group/rotation sort/rotation group/punch hole/z-fold/C-fold
duplex print: ON (open like book/open like calendar) OFF
delete file after printing:
merge file:
switch language ON/*OFF
reverse screen color ON/*OFF
between-job shift** *ON/OFF
between-job interleaf ON (paper source select) *OFF
between-set interleaf ON (setting range between *10 and 9999; paper source select) *OFF
right wait time indication copier/box/other (for each, ON/*OFF)
Registration of the size of the side paper deck** A3/A4/A4R/B4/B5/11×17/LGL/LTR/LTRR
output tray paper mix** *ON/OFF
original reading area cleaning prompt *ON/OFF
function limit mode** ON/*OFF
shut-down mode execute key
reset common settings Do you really want to reset?: yes/no
Mode Description
time fine-adjust by +/- in 1-min increments
auto sleep time 10 sec; *1, 2, 10, 15, 20, 30, 40, 50 min; 1 hr; 90 min; 2, 3,4 hr
auto clear time 0=none, 1, ..., *2, ..., 9 min (in 1-min increments)
silent mode shift time 0=none, 1*, ..., 9 min (1-min increments)
set weekly timer everyday from Sun to Sat (00:00 to 23:59; in 1-min increments)
Mode Description
zoom fine-adjust XY, independent: -1.0% to +1.0% (in 0.1%-increments), *0%
center bind staple edging** start key
change middle bind position**
(w/ saddle finisher)
size: A3, 11x17/B4/A4R, LTR, LGL
position: -2.0 mm to +2.0 mm (in -0.25-mm increments), *0 mm
Adjustment of the creep (displacement) correction
volume
Correction volume (For each type of paper): 0.00 to 2.00mm
(Interval of 0.05mm) *0.25mm
Adjustment of the folding position** Adjustment of Z-fold position
-2mm to +1.5mm, *0mm (incremented by 0.5mm)
Adjustment of C-fold position
A: 0.0mm to 6.0mm, *0mm
B: 0.0mm to 3.0mm, *0mm (incremented by 0.5mm)
correct density copier/box, transmit; 9 steps each (at time of shipment, set to '5')
Adjustment of contrast of characters/background Relative contrast value: -7 to *+7, 0
Print setting for sample printing
Setting of the standard value: 0 to 64, *20
Density of a latent image: 0 to 36, *8
Feeder cleaning Start key
Drum cleaning Start key
Wire cleaning Start key
Mode Description
transmit (specifications setup)** transmission result report: *only if error/ON/OFF
Mode Description
To Next Page
Loading...
Need help?
General
