Chapter 17
17-53
F-17-15
17.8 COUNTER (Counter Mode)
17.8.1 COPIER
17.8.1.1 COPIER List
0015-5953
iR5065 / iR 5055 / iR5075 / / /
<TOTAL>
T-17-64
<PICKUP>
COPIER > COUNTER > TOTAL
Sub-item Description Level
SERVICE1 total counter 1 for service
Increases the count when paper is discharged outside the machine.
(regardless of the size of paper, i.e., large or small)
after 99999999, resets to 00000000
1
SERVICE2 total counter 2 for service
Increases the count when paper is discharge outside the machine.
(in the case of large size, increases by 2; in the case of small size, increases by 1)
after 99999999, resets to 00000000
1
COPY total copy counter
Increases the count when copying is over and the paper is discharged outside the machine.
after 99999999, resets to 00000000
1
PDL-PRT PDL print counter
Increases the count when paper is discharged outside the machine or duplex stacking occurs to suit the charge counter in PDL print
mode.
in the case of a blank sheet, the count remains unchanged; for both large and small sizes, the count is increased by 1
after 99999999, resets to 00000000
1
FAX-PRT fax reception print counter
Increases the count when paper is discharged outside the machine or duplex stacking occurs to suit the charge counter in fax
reception mode.
in the case of a blank sheet, the count remains unchanged; for both large and small sizes, the count is increased by 1; the reading
may be reset
after 99999999, resets to 00000000
1
RMT-PRT remote print counter
Increases the count when paper is discharged outside the machine or duplex stacking occurs to suit the charge counter in remote
print mode.
in the case of a blank sheet, the count remains unchanged: for both large and small sizes, the count is increased by 1; the reading
may be reset
after 99999999, resets to 00000000
1
BOX-PRT box print counter
Increase the count when paper is discharged outside the machine or duplex stacking occurs to suit the charge counter in box print
mode.
in the case of a blank sheet, the count remains unchanged; for both large and small sizes, the count is increased by 1; the reading
may be reset
after 99999999, resets to 00000000
1
RPT-PRT report print counter
Increases the count when paper is discharged outside the machine or duplex stacking occurs to suit the charge counter in report print
mode.
in the case of a blank sheet, the count remains unchanged; for both large and small sizes, the count is increased by 1; the reading
may be reset
after 99999999, resets to 00000000
1
2-SIDE duplex copy/print counter
Increases the count when paper is discharged outside the machine or when duplex stacking occurs to suit the charge counter and to
indicate the number of duplex copies/prints.
in the case of a blank sheet, the count remains unchanged; for both large and small sizes, the count is increases by 1; the reading
may be reset
after 99999999, reset to 00000000
1
SCAN scan counter
Increases the count when an original has been read, indicating the number of originals read.
for both large and small sizes, the count is increased by 1; the reading may be reset
after 99999999, resets to 00000000
1
Result (OK/NG)
IP address input
To Next Page
Loading...
Need help?
General
