4
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
5
Make your selection in the E Print Target list.
6
Make your selection in the F Print Quality list.
7
Click the Page Setup tab to display the Page Setup
sheet.
8
In the A Page Size list, click the size of the original as specified in the application. In this case, click ISO A4 or
Letter (8.5"x11").
9
In H Orientation, click J Landscape.
10
Select and click a roll paper in the L Paper Source list.
11
Select the width of the loaded roll in the M Roll Paper Width list—in this case, ISO A2/A3 Roll (420.0mm).
12
Confirm the print settings and print as desired.
Note
•
For tips on confirming print settings, see "Confirming Print Settings ." ➔P.159
Making the Original Orientation Match the Paper Orientation (Mac OS)
Making the Original Orientation Match the Paper Orientation (Mac OS)
This topic describes how to print an original in landscape orientation after matching the paper orientation, based on the
following example.
•
Document: An original in landscape orientation
•
Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
•
Paper: Roll paper
•
Paper type: Plain Paper
•
Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
iPF670
Making the Original Orientation Match the Paper Orientation (Mac OS)
User's Guide
Enhanced Printing Options Other useful settings
147
To Next Page
Loading...
Need help?
General
