Note
•
For instructions on removing the Roll Holder from rolls, see "Removing the Roll Holder from Rolls." ➔P.364
8
Holding it at the positions indicated, close the Roll Cover.
Note
•
To load new roll paper in the printer at this point, see "Loading Rolls in the Printer." ➔ P.357
Removing the Roll Holder from Rolls
Removing the Roll Holder from Rolls
1
Lift the Holder Stopper lever (a) from the shaft side to
unlock it. Holding the Holder Stopper at the position in-
dicated (b), remove it from the Roll Holder.
2
Remove the Roll Holder from the roll.
Removing the Roll Holder from Rolls
iPF670
User's Guide
Handling and Use of Paper Handling rolls
364
To Next Page
Loading...
