Canon IPF670 - Line Thickness Is Not Uniform; Lines Are Misaligned

Line thickness is not uniform
Line thickness is not uniform
Cause Corrective Action
In the Special Settings dialog box of
the Windows printer driver, Fast Graph-
ic Process is set to On.
Access the printer driver Properties dialog box from Print in the File menu of the source ap-
plication, and follow these steps to print.
1. Clear the option Open Preview When Print Job Starts on the Main sheet.
2. Clear the option Page Layout on the Layout sheet.
3. Click the Special Settings button in the Layout sheet, open the Special Settings dialog
box, and set Fast Graphic Process to Off.
The type of paper specified in the print-
er driver does not match the type loa-
ded in the printer.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.") ➔P.357
(See "Loading Sheets in the Printer.") ➔P.375
Make sure the same type of paper is specified in the printer driver as you have loaded in the
printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
Lines are misaligned
Lines are misaligned
Cause Corrective Action
The Printhead alignment is not adjusted. Adjust the Printhead alignment.
(See "Automatic Adjustment to Straighten Lines and Colors.") ➔P.526
(See "Manual Adjustment to Straighten Lines and Colors.") ➔P.527
(See "Adjusting Line Misalignment.") ➔P.529
The type of paper specified in the printer
driver does not match the type loaded in
the printer.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.") ➔P.357
(See "Loading Sheets in the Printer.") ➔P.375
Make sure the same type of paper is specified in the printer driver as you have loaded in the
printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
Line thickness is not uniform iPF670
User's Guide
Troubleshooting Problems with the printing quality
596