6
Open the Ink Tank Cover and install the ink tanks.
7
Load the Roll Media on the Roll Holder.
(See "Attaching the Roll Holder to Rolls.") ➔P.354
8
Load the Roll Media in the printer.
(See "Loading Rolls in the Printer.") ➔P.357
9
Install the software.
Note that the driver installation procedure varies depending on the type of connection.
Important
•
When the printer is connected to a network (via TCP/IP), the printer's IP address may be changed if you
reinstall the printer.
In this case, be sure to reconfigure the printer's IP address.
iPF670
Reinstalling the Printer
User's Guide
Maintenance and Consumables Other Maintenance
573
To Next Page
Loading...
