14
Click G Scaling and enter 120.
Note
•
You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge of the
paper will not be printed.
•
If the original size after enlargement or reduction is smaller than the paper size, the original is printed in the
upper-left corner. In this case, you can center originals by selecting the J Print Centered check box.
15
Confirm the print settings, and then click M Print to start printing.
Note
•
For tips on confirming print settings, see "Confirming Print Settings ." ➔P.279
Resizing Originals by Entering a Scaling Value (Mac OS)
iPF670
User's Guide
Enhanced Printing Options Printing enlargements or reductions
74
To Next Page
Loading...
